All upgrades are available in Zip format. Instructions for using the upgrade are provided within the Zip file.

Products with an Ethernet interface may be upgraded using the TFTP protocol. TFTP server software is required for this.

All products may be upgraded directly from the supervisor port using any terminal emulation software which supports sending a text file directly as text (such as HyperTerminal).
 
Eloquence Product Software upgrades
 
Elink 2/4
V1.02 upgrade via Supervisor port 245K This upgrade should only be used on an Elink 2 or Elink 4.
This upgrade includes an added feature to allow data to be clocked in the data port using an inverted clock to cure problems when cable lengths cause phase differences between data and clock.
     
V1.02 upgrade via TFTP 113K This upgrade should only be used on an Elink 2 or Elink 4.
This upgrade includes an added feature to allow data to be clocked in the data port using an inverted clock to cure problems when cable lengths cause phase differences between data and clock.
     
Firmware V3.1 upgrade via TFTP 16K This upgrade should only be used on an Elink 2 or Elink 4.
This upgrade is required for the inverse clock feature added to software version 1.02.
     
V1.03 upgrade via Supervisor port 247K This upgrade should only be used on an Elink 2 or Elink 4.
This upgrade provides a new menu page to allow SNMP traps to be configured via the supervisor port or telnet.
     
V1.03 upgrade via TFTP 114K This upgrade should only be used on an Elink 2 or Elink 4.
This upgrade provides a new menu page to allow SNMP traps to be configured via the supervisor port or telnet.